Ȩ > Á¦Ç°Á¤º¸ > C-MEDIA >


 

 

CM108: USB Audio I/O Controller

Overview
 

CM108 is a highly integrated single chip USB audio solution. All essential analog modules are embedded in CM108, including dual DAC and earphone driver, ADC, microphone booster, PLL, regulator, and USB transceiver. It is very suitable for USB headset, USB earphone or USB audio interface box application. Many features are programmable with jumper pins or external EEPROM. In addition, audio adjustment can be easily controlled via specific HID compliant volume control pins. For value added application, external codec or audio DSP can be connected to CM108 via I2S pin for further processing. 4 GPIO pins can be accessed with customer application software for additional value added application.

 

Features

 
l Compliant with USB 2.0 full speed operation 
l Compliant with USB audio device class specification v1.0 
l Supports USB suspend/resume mode and remote wakeup with volume control pins
l Single 12MHz crystal input with on-chip PLL and embedded USB transceiver 
l Jumper pin for speaker mode (playback only) or headset mode (playback + recording) 
l For headset mode, USB audio function topology has 2 input terminals, 2 output terminals, 1mixer unit, 1 selector unit, and 3 feature units 
l Jumper pin for mixer unit enable/disable under headset mode 
l For speaker mode, USB audio function topology has 1 input terminal, 1 output terminal, and 1 feature unit 
l Support one control endpoint, one isochronous out endpoint, one isochronous in endpoint, and one interrupt in endpoint 
l Alternate zero bandwidth setting for releasing playback bandwidth on USB bus when this device is inactive 
l Volume up, volume down, and playback mute support USB HID for host control synchronization 
l Record mute pin with LED indicator for record mute status 
l  External EEPROM interface for vendor specific USB VID, PID, and serial number 
l  EEPROM write function via vendor specific request for mass production convenience 
l  Customized embedded VID, PID, and product string by customer request 
l 4 GPIO pins with read/write via HID 
l  S/PDIF output interface